LEGEND:

*Air Conditioning and Refrigeration Institute.

NOTES:
1. Rated in accordance with ARI Standard 550/590-2003 at standard rating conditions.
2. Standard rating conditions are as follows:
    Cooler Conditions:
       Leaving water temperature: 44 F (6.7 C)
       Flow rate: 2.4 gpm/ton ( 0.043 l/s/kW)
    Fouling Factor:
       0.00010 hr x sq ft °F/Btu (0.000018 m2 x °C/W)
    Condenser Conditions:
       Entering Air Temperature: 95 F (35 C)

AquaForce 30XA chillers were designed from the ground up to meet the efficiency demands of today and the future by providing premium air-cooled chiller packages for contractors, consulting engineers and building owners. Value-added features include rotary screw compression, R-134a HFC refrigerant, a quiet AeroAcoustic™ fan system, easy to use ComfortLink™ controls, microchannel condenser coil technology, and an optional integrated hydronic pump package with VFD-compatible motors

Performance Features

Full-load EER values up to 10.9 IPLV values up to 15.4 Easy to use controls Low sound levels AeroAcoustic fan system Operation from -20 F to 125 F ambient conditions High-efficiency screw compressors Novation® microchannel heat exchanger (MCHX) condenser coils E-coated Novation microchannel heat exchanger (MCHX) condenser coils (factory-installed option) Hydronic pump package with VFD compatibility on sizes 090-160 (factory-installed option) Energy Management Module minimizes chiller energy consumption (factory-installed option or field-installed accessory) Non-fused disconnect switch (factory-installed option) Minimum load control (factory-installed option, field-installed accessory) Low ambient head pressure control (factory-installed option or field-installed accessory) Wye-delta starter available (factory-installed option) ComfortLink™ controls with Touch Pilot™ or Navigator™ display ASHRAE 90.1 complaint AHRI certified BACnet* and LON translator control (factory-installed option or field-installed accessory) EXV (Electronic Expansion Valve)

Reliability Features

Minimum of 2 independent refrigerant circuits Factory full-load run tested Heavy-gage galvanized steel frame UL/ETL Listed Security grilles (factory-installed option or field-installed accessory) Hail guards/Privacy screen choices (factory-installed option or field-installed accessory) Low ambient head pressure control (factory-installed option or field-installed accessory) E-coated MCHX coil protection (factory-installed option) Redundant pump with VFD-compatible motor available with hydronic pump package (sizes 090-160; factory-installed option) Coil corrosion coatings available on all coil types (factory-installed option) EXV (Electronic Expansion Valve)

Maintenance Features

Over 15 diagnostic functions Permanently lubricated fan motor bearings Compressor suction service valves (factory-installed option) Microchannel condenser coils with inherent corrosion resistance and offering simplified cleaning (factory-installed option) Unit-mounted, non-fused disconnect (factory-installed option) Remote service port for easier machine diagnostics (factory-installed option or field-installed accessory)

Installation Features

Factory charged with R-134a refrigerant All-in-one package Integrated hydronic pump package with VFD-compatible motors (sizes 090-160; factory-installed option) GFI (ground fault interrupter) convenience outlet (factory-installed option or field-installed accessory) Remote cooler kit (field-installed accessory) Single or dual-point electrical connections available (factory-installed option) Control transformer (factory-installed option) Structurally robust base Circuit setter provided with optional pump package (factory-installed option)

Standard Warranty

One year from start-up or 18 months from shipment limited warranty 3-year coil parts warranty on Novation microchannel heat exchanger Extended warranty packages available